Caius has dumped the GAL chip from his Ultra X Weapon PCB.
The GAL was unprotected but the board does not work so its down as Assumed working until I find out otherwise.
Thanks Caius
Ive had this Jackal board for a while now and have only recently noticed that there is a PAL16L8 present on it.
Yesterday I thought I may as well desolder and dump it but it just wasnt going to be that easy.
The dump generated way too many product terms for one of the pins. After a day of messing about with it I gave up and revisited it this evening.
Anyway, I finally managed to get it working 100% the same as the original.
The chip is located at 12D and has the markings 007343 on it.
So I said the last update would be the final one. I lied.
Nothing changed but added a 32 bit interleave support. Will probably add 32 bit deinterleave support at some point too but I havent needed that function yet.
Not sure about this one.
The board is good for nothing, looks like its had liquid spilled on it a long time ago and there is green gunk everywhere.
There is not much on the board that works but this GAL appears to be unlocked.
Its a GAL22V10 found on the daughter board, it may come in useful for someone.
On the motherboard of the System 16B there is a couple of PLDs.
315-5213 is a PAL16R6, mine is locked and im not going to attempt to reverse it
315-5214 is a CK2605 chip which I have dumped and converted it to fit in a GAL16V8 device. I have confirmed this is working.