Got a broken Golden Tee Supreme board that has 2 PALs on it. They are locked so dumped them with the PAL dumper and they seem to be OK but as I cannot test them they will be marked as Untested.
Im guessing they are the same PALs as used in the other Golden Tee titles that use the same board. Only the ROMs seem different.
They are labelled:
ITSS-2 @ location U72
ITSFR-1 @ location U65
Caius has dumped the GAL chip from his Ultra X Weapon PCB.
The GAL was unprotected but the board does not work so its down as Assumed working until I find out otherwise.
Thanks Caius
Ive had this Jackal board for a while now and have only recently noticed that there is a PAL16L8 present on it.
Yesterday I thought I may as well desolder and dump it but it just wasnt going to be that easy.
The dump generated way too many product terms for one of the pins. After a day of messing about with it I gave up and revisited it this evening.
Anyway, I finally managed to get it working 100% the same as the original.
The chip is located at 12D and has the markings 007343 on it.
So I said the last update would be the final one. I lied.
Nothing changed but added a 32 bit interleave support. Will probably add 32 bit deinterleave support at some point too but I havent needed that function yet.
Not sure about this one.
The board is good for nothing, looks like its had liquid spilled on it a long time ago and there is green gunk everywhere.
There is not much on the board that works but this GAL appears to be unlocked.
Its a GAL22V10 found on the daughter board, it may come in useful for someone.
