Steve Rice has sent me a few CPS1 files that were missing.
Among then are ones for Magic Sword and The Punisher.
These were not dumped but reversed by himself and have been fully tested by him too. They are in GAL16V8 format.
Big thanks to Steve
Zabanitu has sent in his own schematic of the sound section from a Cadash board. He also says it applies to a Rainbow Islands board too (with a couple of minor differences).
Thank you very much to Zab for this. Hope it helps someone out one day.
Taito Sound Schematic Download
Andreas is still sending more stuff my way.
Today we have a dump from Gaplus. The PAL is located at 9C and was taken from an unprotected chip.
Andreas has sent me another PAL dump, this time from Bosconian.
The board isnt working but the PAL dump looks good so it down as assumed working and will need converted to a GAL if it to be used with one.
Many thanks to Andreas for continuing to send PAL dumps.
Andreas has dumped PAL DD1-6 from his Dig Dug pcb.
The PAL was unprotected and will need to be converted to a GAL (unless you have a blank PAL chip handy).
Thanks to Andreas once again