PAL Updates – Page 25 – JAMMArcade.net

‘Massive’ Konami PAL dumps update

PAL Updates Comments Off

Jul 172015

Today we have a huge PAL dumps update and all of them came from Konami boards (original and bootleg, too).Let’s start with order.

Porchy dumped the PLDs (actually one is a redump and replaces an existing one) from an original Time Pilot PCB.Devices were two 82S153 so he converted the dumps to a more usable GAL16V8 format and succesfully tested them on hardware.

Dragos sent us the PAL20L10 chip from his Mystic Warriors PCB, I dumped it and Porchy took care of reversing it in a GAL22V10.Dragos successfully tested it.

Andreas sent us dump of the PLS173 from an original Devil World PCB ( board ID GX687, chip marked ‘007789’ @10H also present on Gradius II).We mark this dump as untested until we found a way of reversing the chip in a GAL or test the dump in an original device.

Thank you all for your precious contributions.

As for me I dumped the three PALs (two PAL16L8 and one PALCE16V8) from a Run and Gun PCB and the two ones (PAL16L8) from a Block Hole.Lastly I dumped the two 82S153 devices from a Gyruss bootleg PCB (located on the Konami-1 replacement piggyback board) and reversed them into GAL format.All my dumps come in GAL16V8 format (except for one from Gyruss that needs a GAL18V10) and have been tested as working on PCB.

SEGA and Taito PAL dumps update

PAL Updates Comments Off

Jul 102015

Some PAL dumps update today.Porchy succesfully reversed into GAL16V8 format a dump (made by be some time ago) from a PLS153 device labeled ‘315-5244’ which, as far as we know, is present on Sega System16A hardware (Shinobi and Passing Shot for sure) and should be identical to the ‘315-5150″ one from Fantasy Zone (always on System16A).’Spectroman’ succesfully tested this dump on his Fantasy Zone PCB.

Andreas sent in an archive containing all the PLDs from a Taito Midnight Landing PCB (a flight simulator).All PLDs were unprotected PAL16L8 and PAL20L8 (except one PAL16L8 @IC54 which secured so was not dumped) and came from a not working board.So, we will mark them as untested.Drop us a line if you have any chance to test them.

Thanks to all for their precious contributions.

Pretty Soldier Sailor Moon PAL dumps added

PAL Updates Comments Off

Jul 042015

Today, during a repair (log will follow later) I created the replacements for the two remaining PLDs (two secured GAL16V8B) from a Banpresto Pretty Soldier Sailor Moon PCB.With these two dumps we have now a complete PLDs set of this PCB since the other three (PEEL18CV8 devices) have already been dumped and uploaded on our database though they remain untested.Thanks to Ifog for providing me binary dump of one of the two GALs.

X-Multiply (IREM M72 hardware) PAL dump added

PAL Updates Comments Off

Jul 042015

In the last days I dumped the specific PLD (a PAL16L8) from a X-Multiply PCB (IREM M72 hardware, PAL is on top board ‘M72-C-A’).Chip was kindly provided by my friend ‘robotype’ and dump has been tested as working from ‘cpsystem3’ in a GAL16V8 targeting device.Thanks to both.

Undercover Cops (IREM M92 hardware) PAL dumps added

PAL Updates Comments Off

Jun 292015

Today I dumped the two specific PALs from an Undercover Cops (IREM M92 hardware).The two devices (PAL16L8) are located on ROM board (M92-E-B) , both dumps have been tested working in a GAL16V8 targeting device.I also succesfully tested the three PALs dumps already on our database (labeled as ‘M92-A-3M’, ‘M92-A-7J’ and ‘M92-A-9-J’ on CPU board), this confirms they should be the same for all M92 games.

Older Entries Newer Entries