A guy has called Zabanitu has contacted me with a PAL dump from with bootleg Commando board, he has also made a nice little schematic of how it connects up.
Many thanks to him for this.
I dumped the 4 PAL16L8s from Op Wolf this morning.
I haven’t yet had this board up and running so these are untested. If someone could verify these for me I would be most grateful.
EDIT: Tested these now and they seem to work fine
They are:
B20-09.IC19
B20-10.IC84
B20-11.IC85
B20-12.IC92
Dumped some unprotected PALs from a broken Psycho Soldier board.
There are several empty PAL sockets on my board set and not sure where any of them go. There was also a PAL marked up as A6003-1 which MAME shows as being from Chopper. Not sure if this is also used in Psycho Soldier too but and info on this will be appreciated.
The PALs are:
A6003-1
A6004-2
A6004-3
As always with non working boards, these dumps are assumed working until im informed otherwise.
Dumped the unprotected PAL10L8 on my CVS motherboard. The board is not working but since the chip was unprotected im assuming its OK.
Andreas has sent some more dumps, this time from Volfied IC’s 63, 64 and 65.
These are in PAL format and will required converting if to be used on a GAL
I also dumped some Crude Buster PALs I had.
These were taken from a non working board and TC-4 and TC-5 (registered) were both protected.
Although the board was non working I am making an assumption these will work. Please let me know if they dont.