caius has been a busy guy once again.
This time we have dumps from Night Slashers, Fighter History and Magical Cat Adventure.
The PALs from the first two may also work on other boards of the same type as the ID’s match. Until this is confirmed though the names will stay seperate.
Thanks very much to caius
I have recreated the PLD chip at location 1F on Spy Hunter main PCB.
This may or may not be the same for other MCR3 based games.
The ID on the original chip is: 0066-322BX-XXQX
Due to caius sending me a complete set of dumps from the same board set and also confirming the single PAL dump I already had for the board was a match I have removed this duplicate.
Thanks caius
caius has sent a nice set of PAL dumps from Cadillacs and Dinosaurs bootleg in.
As there is no usable IDs on the board he has also taken the time to mark them up on a photo.
Thanks very much to caius for these
caius has been busy again. This time we have a set of PALs from a Kiki Kaikai bootleg board and the last PAL we have missing from the Super Pang bootleg set.
Kiki Kaikai had no locations silkscreened or ID markings so they have been labelled PAL1-PAL5. There is an image showing the locations which can be found in the archive table.
Also, PAL2 needed to have pin 12 disconnected from the PCB to work. caius has modified the dump so the GAL chip can fit straight in without the need to remove the leg. Both versions are available just in case though.
Thanks again to caius