Today I dumped the PLDs from a Gun Force 2 PCB (Irem M92-B-G ROM board revision).Device were two secured PAL16L8 with no marking or label.There is another PAL but it’s set as registered so undumpable (but it seems not used since PCB works fine without it).Dumps have been successfully tested on GAL16V8 targeting device.
Today I dumped the PAL from an original Juno First PCB.PAL is at location B6 of lower board, part name is scratched off but schematics reports it as a PAL10L8.Dump has been tested as working in a GAL16V8 targeting device.
Today we have some new PAL dumps from the following boards:
All dumps have been tested and working in GAL targeting devices.
I dumped a PLD from a working Van-Van Car PCB (manufactured by Sanritsu or Karateco).Device was a unprotected PAL16L2 labeled ‘VAN-83’ @IC79, there are other three PALs on PCB but they are registered and secured.Dump is tested as working in a GAL16V8 targeting device.
Today I dumped the PALs (three secured PAL16L8) from a Sky Wolf PCB (bootleg of Airwolf).Devices are located on CPU board.Dumps have been successfully tested on GAL16V8 targeting devices.